Agilent Technologies 34970A - Software Drivers for System Integration

Frequency and Period Configuration Commands
(see page 214 in the User’s Guide)
CONFigure
:FREQuency [{<
range>|AUTO|MIN|MAX|DEF}
[,<resolution>|MIN|MAX|DEF}],] (@<scan_list>)
CONFigure? [(
@<ch_list>)]
[SENSe:]
FREQuency:VOLTage:RANGe {<range>|MIN|MAX}[,(@<ch_list>)]
FREQuency:VOLTage:RANGe? [{(
@<ch_ list>)|MIN|MAX}]
FREQuency:VOLTage:RANGe:AUTO {OFF|
ON}[,(@<ch_list>)]
FREQuency:VOLTage:RANGe:AUTO? [(
@<ch_list>)]
[SENSe:]
FREQuency:APERture {0.01|0.1|1|MIN|MAX}[,(@<ch_list>)]
FREQuency:APERture? [{(
@<ch_list>)|MIN|MAX}]
[SENSe:]
FREQuency:RANGe:LOWer {3|
20|200|MIN|MAX}[,(@<ch_list>)]
FREQuency:RANGe:LOWer? [{(
@<ch_list>)|MIN|MAX}]
CONFigure
:PERiod [{<
range>|AUTO|MIN|MAX|DEF}
[,<
resolution>|MIN|MAX|DEF}],] (@<scan_list>)
CONFigure? [(@<ch_list>)]
[SENSe:]
PERiod:VOLTage:RANGe {<range>|MIN|MAX}[,(@<ch_list>)]
PERiod:VOLTage:RANGe? [{(
@<ch_ list>)|MIN|MAX}]
PERiod:VOLTage:RANGe:AUTO {OFF|
ON}[,(@<ch_list>)]
PERiod:VOLTage:RANGe:AUTO? [(
@<ch_list>)]
[SENSe:]
PERiod:APERture {0.01|
0.1|1|MIN|MAX}[,(@<ch_list>)]
PERiod:APERture? [{(
@<ch_list>)|MIN|MAX}]
This command redefines the scan list when executed.
Default parameters are shown in bold.
9