Agilent Technologies 4339B User Manual

Agilent
4339B High
Resistance
Meter
Operation Manual
SERIAL
NUMBERS
This
manual
applies
directly
to
instruments
with
serial
number
prex
JP1KD
,
or
rmware
revision
1.04.
F
or
additional
important
information
about
serial
numbers
,
read
\Serial
Number"
in
Appendix
A.
Agilent Part No. 04339-90060
Printed in Japan March 2003
Ninth Edition

Agilent Technologies 4339B Specifications

General

Type	High Resistance Meter
Measurement Parameters	Resistance, Current
Basic Accuracy	±0.5% of reading
Display	Vacuum Fluorescent Display
Measurement Modes	Resistance, Current
Voltage	1 mV to 100 V
Interfaces	GPIB
Interface	GPIB

Summary

Getting Started

Introduction and Overview

Provides basic introduction to the 4339B and manual structure.

Front and Rear Panel Interfaces

Details physical controls, indicators, and rear panel connectors.

Initial Setup and Powering On

Using Front Panel Keys and Basic Operations

Explains key types, operations like calibration, and voltage settings.

Connecting Test Fixtures and Measurement Setup

Guide to connecting DUTs and configuring measurement parameters.

Operating the 4339B

Introduction to Instrument Operation

Overview of operating procedures and chapter content.

Measurement Configuration and Timing

Settings for time modes, averaging, delay, and sequence parameters.

Making Measurements and Using Features

Core measurement process, comparator, deviation data, and contact checks.

Managing Settings, Display, and Data Storage

Troubleshooting Common Operational Issues

Function Reference

Front Panel Components and Indicators

GPIB Communication Interface and Commands

Remote Operation via GPIB

Introduction to Remote Control

Overview of controlling the 4339B remotely using GPIB.

GPIB Command Structure and Syntax Rules

Subsystem Command Reference Guide

Maintenance and Testing Procedures

Introduction to Maintenance and Testing

Performance Test Procedures

Detailed steps for various performance tests (voltage, current, resistance).