15
General Programming Aspects
Agilent 81101A Remote Control
Agilent 81101A Remote Control
GP-IB Address You can only set the GP-IB address from the front panel of the instrument
(refer to the Quick Start Guide).
The default GP-IB address is 10.
Modes of
Operation
The Agilent 81101A has two modes of operation:
• Local
The instrument is operated using the front panel keys.
• Remote
After receiving the first command or query via the GP-IB, the
instrument is put into remote state. The front panel is locked.
To return to local operating mode, press SHIFT (LOCAL).
To Next Page
Loading...
