Agilent Technologies 8166B Programming Guide

Signal Generation – The SOURce Subsystem Measurement Operations & Settings
Agilent 8163A/B, 8164A/B & 8166A/B Mainframes, Fifth Edition 133
command:
[:SOURce[n]][:CHANnel[m]]:WAVelength:CORRection:ZERO
syntax: [:SOURce[n]][:CHANnel[m]]:WAVelength:CORRection:ZERO
description: Executes a wavelength zero.
parameters: none
response: none
example: sour2:wav:corr:zero
affects: All tunable laser modules except Agilent 81649A and Agilent 81689A/B
command:
[:SOURce[n]][:CHANnel[m]]:WAVelength:CORRection:ZERO:ALL
syntax: [:SOURce[n]][:CHANnel[m]]:WAVelength:CORRection:ZERO:ALL
description: Executes a wavelength zero on every tunable laser source in a mainframe.
parameters: none
response: none
example: sour2:wav:corr:zero:all
affects: All tunable laser modules except Agilent 81649A and Agilent 81689A/B
command:
[:SOURce[n]][:CHANnel[m]]:WAVelength:CORRection:ZERO:TEMPerature:ACTual?
syntax: [:SOURce[n]][:CHANnel[m]]:WAVelength:CORRection:ZERO:TEMPerature:ACTual?
description: Reports the current lambda zero tempearture.
parameters: none
response: float value; temperature in °C
example: sour0:wav:corr:zero:temp:act?
affects: All tunable laser modules except Agilent 81649A, Agilent 81689A/B and 819xxA/B
command:
[:SOURce[n]][:CHANnel[m]]:WAVelength:CORRection:ZERO:TEMPerature:DIFFerence?
syntax: [:SOURce[n]][:CHANnel[m]]:WAVelength:CORRection:ZERO:TEMPerature:Difference?
description: Reports the temperature difference required to trigger an auto lamda zero.
parameters: none
response: float value; temperature in °C
example: sour0:wav:corr:zero:temp:diff?
affects: All tunable laser modules except Agilent 81649A, Agilent 81689A/B and 819xxA/B

Agilent Technologies 8166B Specifications

General

Brand	Agilent Technologies
Model	8166B
Category	Measuring Instruments
Language	English