6-17
Error Messages
Error Messages in Alphabetical Order
NOT ENOUGH SPACE ON DISK FOR STORE
Error Number
44
The store operation will overflow the available disk space. Insert a new disk or
purge files to create free disk space.
NO VALID MEMORY TRACE
Error Number
54
If you are going to display or otherwise use a memory trace, you must first store
a data trace to memory.
NO VALID STATE IN REGISTER
Error Number
55
You have requested the analyzer, over GPIB (or by sequencing), to load an
instrument state from an empty internal register.
OK TO ALTER CORRECTION CONSTANTS?
Error Number
186
This message is displayed as a prompt during operations when the correction
constants will be changed. Correction constants may be change in the
adjustment tests in the service menu.
ONLY LETTERS AND NUMBERS ARE ALLOWED
Error Number
43
You can only use alpha-numeric characters (and underscores) in disk file titles
or internal save register titles. Other symbols are not allowed, except for the
“underscore” symbol.
OPTIONAL FUNCTION; NOT INSTALLED
Error Number
1
The function you requested requires a capability provided by an option to the
standard analyzer. That option is not currently installed. (Refer to “Analyzer
Options Available” on page 7-3 for a description of the available options.)
OVERLAP! LIST TYPE CHANGED TO STEPPED
Error Number
211
The list type changed to stepped because one or more frequency segments in the
swept list table overlapped. Change the frequency ranges of the overlapping
segments and switch back to swept list mode.
OVERLOAD ON INPUT A, POWER REDUCED (ES only)
Error Number
58
See OVERLOAD ON INPUT R, POWER REDUCED (error number 57).
OVERLOAD ON INPUT B, POWER REDUCED (ES only)
Error Number
59
See OVERLOAD ON INPUT R, POWER REDUCED (error number 57).
To Next Page
Loading...
Need help?
General
