Agilent Technologies 8753ET Configuration Guide

7
Verification kit
• 85029B
7-mm verification kit
Includes attenuators and mismatch attenuator
with data on a 3.5-inch disk for use in confirm-
ing system measurement performance after a
calibration has been performed, traceable to
national standards. Test procedure is provided
in the service manual. For use with a standard
8753ES, or with systems including an 8753ES
Option 011 and an 85046A, or 85047A test set.
This verification kit may also be used with an
8753ET with the addition of two type-N(m) to
7-mm adapters. The 85031B 7-mm calibration kit
and 11857D test-port cables are also required.
Test sets (for use with 8753ES Option 011)
• 85046A
50-ohm S-parameter test set
300 kHz to 3 GHz. Requires the 11857D 7-mm
test-port return cables for two-port device
measurements. Includes a test set interconnect
cable and four RF cables to connect to the
8753ES Option 011.
• Option 913
Rack-mount kit, part number 5062-4069.
• 85047A
50-ohm S-parameter test set
300 kHz to 6 GHz. Requires the 11857D 7-mm
test-port return cables for two-port device
measurements. Includes a test set interconnect
cable and four RF cables to connect to the
8753ES Option 011.
• Option 913
Rack-mount kit, Agilent part number
5062-4069.
• 11850C
50-ohm type-N three-way power splitter
300 kHz to 3 GHz. Requires the Agilent 11851B
RF cable kit.
• 11667A
50-ohm type-N two-way power splitter
DC to 18 GHz. Requires the Agilent 11851B
RF cable kit.
• 86205A
50-ohm RF bridge 300 kHz to 6 GHz
• 86207A
75-ohm RF bridge 300 kHz to 3 GHz
Adapters
• 11525A
7-mm to 50-ohm type-N (male) adapter
• 11853A
50-ohm type-N accessory kit
Contains type-N(m) to type-N(m) adapters,
type-N(f) to type-N(f) adapters, and type-N male
and female shorts.
• 11854A
50-ohm BNC accessory kit
Contains type-N to BNC adapters for both
connector sexes and a BNC male short.
• 11906A
7-16 to 7-16 adapter kit
Contains one 7-16(m) to 7-16(m) adapter, one
7-16(f) to 7-16(f) adapter, and two 7-16(m) to
7-16(f) adapters.
• 11906B
7-16 to 50-ohm type-N adapter kit
Contains adapters for type-N(m) to 7-16(m),
type-N(m) to 7-16(f), type-N(f) to 7-16(m), and
type-N(f) to 7-16(f).
• 11906C
7-16 to 7-mm adapter kit
Contains two 7-mm to 7-16(m) adapters and two
7-mm to 7-16(f) adapters.
• 11906D
7-16 to 3.5-mm adapter kit
Contains adapters for 3.5-mm(m) to 7-16(m),
3.5-mm(m) to 7-16(f), 3.5-mm(f) to 7-16(m), and
3.5-mm(f) to 7-16(f) adapters.

Agilent Technologies 8753ET Specifications

General

Brand	Agilent Technologies
Model	8753ET
Category	Measuring Instruments
Language	English