Chapter 2 41
cdma2000/IS-2000 Mobile Test Application
How Do I Set Up a Call?
5. Check the rest of the Call Parms settings (keys F7 through F12) then press the More key to
check the settings displayed on the 2 of 3 and 3 of 3 menus.
6. Make sure the cell settings, such as SID (System Identification) are compatible with the
mobile station. See “How Do I Change Cell Information?” on page 43.
7. Turn on power to the mobile station and wait for an indication that it has found service.
8. Make a mobile station originated call or wait for the mobile station to perform power up
registration, then press the Originate Call (
F3) key.
9. Verify that the call is connected.
To Next Page
Loading...
Need help?
General
