Agilent Technologies Cary 50

Cary 50 Installation Instructions
5
Install the Cary 50 PCI card
CAUTION
Electrostatic discharge may damage electrical components or boards. When handling electronic
components or boards, ensure you use the provided wrist strap.
CAUTION
Do not touch the components or the gold connectors. Handle the board only by the edges.
To install the Cary 50 PCI card:
1 Remove the grounding wrist strap from the packaging. Wrap the adhesive side
around your wrist.
2 Remove the adhesive backing.
3 Turn off the computer. Disconnect the power cable. Remove the computer
cover.
;
;