General Information
2 EPM-P Battery Operation
General Information
The battery enables the use of your EPM-P power meter in operating
environments where there is no convenient access to an ac power
source.
With the battery option installed and the power meter connected to an
ac power source, the meter operates from the ac source and the battery
runs in a controlled charge mode.
If the meter is powered up under battery power, or if ac power is lost
while connected to an ac source, a pop up window displays
. When this screen is visible the
backlight mode (see see Backlight on page 4) is over-ridden and the
backlight is on continuously. Pressing the softkey returns the
display to the previous screen.
Carry Case A soft carry/operating case is available which makes it easy to
transport and operate your power meter in installation and
maintenance environments. To obtain a carry case order Agilent part
number 34141A.
CAUTION Do not attempt to recharge the power meter or operate the power
meter from an ac power source while it is contained in the carry case.
Running Under Battery Power
Continue
battery-operation.fm Page 2 Thursday, May 30, 2002 4:54 PM
To Next Page
Loading...
Need help?
General
