Agilent Technologies E4423B Installation Notes

14
Perform the Functionality Check of the Signal Generator
1. Reboot the signal generator, allowing it to warm up for five minutes.
2. Press the front panel PRESET button to reset the signal generator.
3. Check for error messages.
•If error messages occur, refer to “Checking Signal Generator Functionality” on page 6 to clear the error
messages.
•If no error messages are present, the signal generator should function properly.

Agilent Technologies E4423B Specifications

General

Brand	Agilent Technologies
Model	E4423B
Category	Portable Generator
Language	English