Hardkey and Softkey Reference ESG Family Signal Generators
Utility
4-122 User’s Guide
8657D PDC (Option UN8)
This softkey is one of the choices in both the Preset Language menu and
the Remote Language menu. The
8657D PDC softkey is a language choice
for the signal generator that is compatible with the remote language
commands used by the 8656D with PDC digital modulation capabilities.
Choosing
8657D PDC in the Preset Language menu allows you to select
this remote language as the default after a normal preset. Choosing
8657D PDC in the Remote Language menu allows you to immediately
change the signal generator to use this remote language.
Softkey Location:
Utility > Power On/Preset > Preset Language > 8657D PDC
Or: Utility > GPIB/RS-232 > Remote Language > 8657D PDC
8657J PHS (Option UN8)
This softkey is one of the choices in both the Preset Language menu and
the Remote Language menu. The
8657J PHS softkey is a language choice
for the signal generator that is compatible with the remote language
commands used by the 8657J with PHS digital modulation capabilities.
Choosing
8657J PHS in the Preset Language menu allows you to select
this remote language as the default after a normal preset. Choosing
8657J PHS in the Remote Language menu allows you to immediately
change the signal generator to use this remote language.
Softkey Location:
Utility > Power On/Preset > Preset Language > 8657J PHS
Or: Utility > GPIB/RS-232 > Remote Language > 8657J PHS
GPIB Address
Press this softkey to change the signal generator’s GPIB address. The
GPIB address is set to 19 at the factory. You can change the address to
any number between 0 and 30. To enter a new value, press
Utility >
GPIB/RS-232 > GPIB Address and rotate the front panel knob, use the up
and down arrow keys, or enter the value using the numeric keypad and
press the
Enter terminator softkey.
The GPIB address setting is a persistent state; it is not affected by an
instrument preset or by a power cycle.
Softkey Location:
Utility > GPIB/RS-232 > GPIB Address
To Next Page
Loading...
Need help?
General
