Chapter 4
Front-Panel Key and SCPI Command Reference
Front-Panel Keys
135
Front-Panel Key and SCPI Command
Reference
4.2.2.3.13 Verify Power Meter Connection
Tests the Connection from the PSA to the power meter.
4.2.2.3.14 Verify Power Meter Connection State Gets the state of the connection to the power meter.
4.2.2.4 Power Meter Needs Calibration
Check whether the power meter needs calibration or not.
4.2.2.5 Power Meter Needs Zero
Check whether the power meter needs zero or not.
Mode: MRECEIVE
Key Path:
System, More, More, Power Meter, Power Meter Config
Remote Command: :SYSTem:COMMunicate:PMETer:TCONnect
Remote Command Notes: Global to the current mode.
Example: MREC:PMET:TCON
Mode: MRECEIVE
Remote Command: :SYSTem:COMMunicate:PMETer:TCONnect:STATe?
Remote Command Notes: Global to the current mode.
Example: :SYST:COMM:PMET:TCON:STAT?
Mode: MRECEIVE
Remote Command: :CALibration:PMETer:NCAL?
Remote Command Notes: Global to the current mode.
Example: :CAL:PMET:NCAL?
Mode: MRECEIVE
Remote Command: :CALibration:PMETer:NZERo?
Remote Command Notes: Global to the current mode.
Example: :CAL:PMET:NZER?
To Next Page
Loading...
