Chapter 4
Front-Panel Key and SCPI Command Reference
Measure
159
Front-Panel Key and SCPI Command
Reference
4.3.4 Tuned RF Level and Tuned RF Level with Tracking
Allows the user to switch to the Tuned RF Level or tuned RF Level with Tracking measurement.
4.3.4.1 SCPI Remote Commands
NOTE Offsets that are turned off (inactive) and return –999.0 when their results are queried over SCPI.
Mode: MRECEIVE
Key Path:
Measure
Remote Command: :CONFigure:TRFLevel for Tuned RF Level measurement
:CONFigure:TTRFLevel for Tuned RF Level with Tracking
Notes: This key invokes Tuned RF Level Measurement.
Example: :CONF:TRFL
:CONF:TTRFL
Table 4-3
Tuned RF Level Tuned RF Level with Tracking
:CONFigure:TRFLevel :CONFigure:TTRF
:INITiate:TRFLevel :INITiate:TTRF
:FETCh:TRFLevel[n]? :FETCh:TTRF[n]?
:MEASure:TRFLevel[n]? :MEASure:TTRF[n]?
:READ:TRFLevel[n]? :READ:TTRF[n]?
Index: n
<Mnemonic>
Results Returned
not specified or
n = 1
Returns the following 7 values:
Absolute Tuned RF level (dBm, Watt or Volt, depending on setting of Display Unit)
Absolute Tuned RF Level Ratio (dB/%) (–999.0 if Display Mode is Normal)
Absolute Tuned RF Level Ratio Reference (dBm, Watt or Volt, depending on setting of Display
Unit)
Relative Tuned RF Level (dB)(–999.0 if it is absolute measurement)
Relative Tuned RF Level Reference (dBm)(–999.0 if it is absolute measurement)
Frequency
This is the value from Frequency counter measurement
To Next Page
Loading...
Need help?
General
