Agilent Technologies E5061B Configuration Guide

7
Test accessories (for 50 Ω system, continued)
Model No. Description
Active Probe
41800A 5 Hz to 500 MHz active probe, 100 kΩ (probe alone) / 1 MΩ (with 10:1 or 100:1 divider). Includes;
- Probe to BNC adapter
- Hook tip adapter
- Slip-on tip adapter
- 10:1 and 100:1 divider
41800A-001 Adds a cable to connect the probe with an external power supply. This option is not necessary for
the E5061B-3L5 since it is equipped with the probe power.
41800A-UK6 Commercial cal certificate with test data
85024A 300 kHz to 3 GHz active probe. Includes;
- Probe tip to type-N Adapter
- 10:1 divider
- Hook tip adapter
- Slip-on tip adapter
- Leads
Differential Active Probe
1141A
1
DC to 200 MHz differential active probe. The 1142A is required. Includes;
- 10x and 100x attenuator adapter
- AC coupling adapter
- Two-inch extension leads
- Mini-grabbers (2 qty.)
- Five-inch ground lead
- Shielded signal lead
- Test board
- Flat-blade alignment tool
- Circuit connection post
Probe Control and Power
Module
1142A Probe control and power module for the 1141A Differential Active Probe.
1. The 1142A Probe Control and Power Module is required.
1141A, 1142A, and E5061B41800A and E5061B

Agilent Technologies E5061B Specifications

General

Brand	Agilent Technologies
Model	E5061B
Category	Measuring Instruments
Language	English