14 Chapter 2
Getting Started
Proper Usage and Cleaning
Proper Usage and Cleaning
The signal generator cover protects against physical contact with internal assemblies that contain hazardous
voltages, but does not protect against the entrance of water. To avoid damage and personal injury, ensure that
liquid substances are positioned away from your signal generator.
WARNING Personal injury may result if the signal generator is not used as specified. Unspecified
use impairs the protection provided by the equipment. The signal generator must be
used with all means for protection intact.
Cleaning Suggestions
To ensure good connections, the connectors on the front and rear panels of the signal generator need to be
cleaned regularly.
To prevent dust build-up that could potentially obstruct ventilation, clean the signal generator cover
periodically. Use a dry cloth, or one slightly dampened with water, to clean the external case parts.
WARNING To prevent electrical shock, disconnect the Agilent PSG signal generator from mains
before cleaning. Use a dry cloth or one slightly dampened with water to clean the
external case parts. Do not attempt to clean internally.
To Next Page
Loading...
Need help?
General
