To Next Page

To Previous Page

52 Chapter 4

Viewing Catalogs and Saving Files

File Menu Functions

the All key under Type.)

Sort: Under the Sort key, you can sort by any of the four columns and you can choose up

(ascending) or down (descending).

Dir Up: moves you up one directory level. If you are already at the top level, this key moves you

up to the drive level, displaying the available disk drives.

Dir Select: moves you down into the highlighted directory or up into the next level (directory or

drive) if the “. .” under the Name: column is highlighted.

NOTE Navigation keys: Use the front-panel Step Keys or Knob and the Dir Up or Dir Select

keys to move around in the directory information box.

4. The drive space line shows the number of bytes used on the drive and the number of bytes still free on

the drive.

Creating a directory

Directories and sub-directories can be created on both the A: floppy disc and the internal C: drive. This

allows maximum flexibility in organizing files. For this example, we will create a directory on the C:

drive.

1. Press

File, More 1 of 2, Create Dir. Your screen should look similar to Figure 4-1, except the entry

fields will be Dir Name: and Path: and the Heading will read: Directories.

2. Navigate through the file system until the Path: field displays C:\. (Use the Step Keys, Knob, Dir

Up, and/or Dir Select keys.)

3. Press

Name and enter the name, “START” using the Alpha Editor. (The numeric keypad is also

available for the filename.) Press

Enter (hardkey) when the Dir Name: field contains this directory

title. (Use the

Bk Sp hardkey on the front panel to make corrections.)

4. Press

Create Dir Now to execute the operation. The message: Creating Directory appears on

the screen. Then the status bar displays: Directory C:\START created.

5. To make a sub-directory, scroll down to the START directory you just created and press

Dir Select.

The Path: field should now read: C:\START\. Repeat Steps 3 and 4 above, using a new name. The

status bar now should read: Directory C:\START\new name created.

Agilent Technologies EMC Series Getting Started Guide

Other manuals for Agilent Technologies EMC Series