Chapter 5 69
Options and Accessories
Options
Additional Manual Set (Option 0B1)
Option 0B1 provides an additional copy of the User’s, Calibration, Specifications, and Reference guides
for your instrument.
APC 3.5 Input Connector (Option BAB)
The type-N female connector is replaced with an APC 3.5 mm male connector. An APC 3.5 (f) to APC
3.5 (f), and BNC (f) to SMA (m) adapters are included for alignment purposes.
Benchlink Web Remote Control Software
(Option 230)
Option 230 provides software which can be used to control the analyzer remotely over the web. When
the analyzer is connected via GP-IB to one personal computer (PC), access to the analyzer is available
through any internet connection by specifying the IP address of the physically connected PC. The
following analyzer functions are available through remote web access:
• front panel control
• capture screen images
• capture trace data
• remote programming commands (SCPI)
Commercial Calibration with Test Data
(Option UK6)
Option UK6 provides the factory calibration test data on a floppy disk and the standard commercial
calibration certificate on the initial analyzer shipment.
Option UK6 is only available at time of purchase.
Component Level Service Documentation (Option 0BV)
Option 0BV provides a copy of the Agilent ESA/EMC Spectrum Analyzers Component-Level
Information. The component-level information includes parts lists, component-location diagrams, and
schematic diagrams for selected assemblies.
Delete Manual Set (Option 0B0)
Option 0B0 deletes copies of the User’s, Calibration, Programmer’s, Specifications, Measurement
guides.
Enhanced Memory Upgrade (Option B72)
Option B72 provides 2 SIMMS which increases the analyzer’s RAM to 32 MBytes and its flash or data
storage memory to 16 MBytes (10 MBytes of which are available to the user for data storage and
measurement personalities).
Express Option: Standard Analyzer (Option STD)
Option STD simplifies ordering and speeds delivery with the following included options:
• Fast Digitized Time Domain Sweeps with additional IF, Sweep and Video Ports (Option AYX)
• High Stability Frequency Reference (Option 1D5)
To Next Page
Loading...
Need help?
General
