72 Chapter 5
Options and Accessories
Options
E7403A, E7404A, and E7405A (1 MHz to 3 GHz) with a nominal gain of 20 dB.
Rack Mount Kit With Handles (Option 1CP)
Option 1CP provides the parts necessary to mount the analyzer in a standard 19 inch (482.6 mm)
equipment rack. It includes front handles and rack slides for added convenience. Rack mount height is
8.75 in (222.3 mm).
Refurbished Analyzer (Option 8ZE)
Refurbished ESA E-Series and L-Series Spectrum Analyzers with various hardware options can be
ordered subject to availability. Measurement personalities may be included or upgraded with Option 8ZE
orders.
RS-232 and Parallel Interface (Option 1AX)
Option 1AX allows you to control your analyzer from a computer that uses an RS-232 interface. It
includes a 2.5 meter 9-pin (f) to 9-pin (f) connector RS-232 cable (Agilent 5182-4794), a parallel
interface connector for printers, a CD-ROM containing IntuiLink Toolbar software
1
, and the
Programmer’s guide for your analyzer.
Option 1AX allows the analyzer to copy its display to a printer connected to the parallel interface port.
Option 1AX can replace Option A4H, which is included with all new analyzers orders. This option was
formerly available as a separate option with previous analyzers.
Service Documentation and Performance Verification and Adjustment Software
(Option 0BW)
Option 0BW provides a copy of the Agilent EMC Spectrum Analyzers Service Guide and PC-based
performance verification and adjustment software on CD-ROM. The service guide describes assembly
level troubleshooting procedures, provides a parts list, and documents the adjustment procedures.
Time-Gated Spectrum Analysis (Option 1D6)
Option 1D6 allows you to selectively measure the spectrum of signals that may overlap in the frequency
domain, but are separated in the time domain. By adjusting a time gate based on a user-supplied trigger
signal, you can significantly increase the diagnostic capability of your spectrum analyzer for
time-interleaved signals.
1. This program allows you to download spectrum analyzer display or data files to a personal computer
using Microsoft® Word or Microsoft® Excel. IntuiLink Toolbar installation instructions are included
with the CD-ROM.
To Next Page
Loading...
Need help?
General
