Chapter 2 97
Front-Panel Key Reference
File
for cable loss). A correction set may
hold up to 200 points. Pressing
Corrections activates the Source key.
Refer to the
Source key description.
Key Access:
File, Save, Type, More
Signal List
Displays all previously saved signal list
files (.LST) and detects the current
signal list in preparation to save it in a
file for retrieval at a future date. The
signal list files contains a list of signals
which include the frequency and
measured amplitudes for each signal.
Key Access:
File, Save, Type, More
Report
Displays all previously saved report
files and detects the current report in
preparation to save it in a file for
retrieval at a future date. Report files
are saved in a (.HTM) file type format.
The Report files can contain the screen
in GIF format, the signal list, and the
analyzer setup. The report files contain
a hyperlink to the GIF file of the
analyzer screen.
Key Access:
File, Save, Type, More
Format
When Type is set to Trace, Format allows you to save a
trace accompanied by the analyzer state. The CSV
format is readable by a spreadsheet on your PC, but
cannot be loaded back into the analyzer. The TRC
format cannot be loaded into a PC, but can be loaded
back into the analyzer. TRC files include the state of
the analyzer and restore all settings when loaded.
When
Type is set to Screen, Format allows you to choose
between bitmap and metafile formats.
Bitmap saves the
screen image in Graphics Interchange Format (GIF)
and Metafile saves the screen image in Windows
Metafile Format (WMF). Reverse Bitmap and Reverse
Metafile
turn black backgrounds to white and yellow
traces to green so they can be printed visibly and with
less use of black ink. Screen images cannot be loaded
back into the analyzer.
Key Access:
File, Save
Source
When Type is set to Trace, Source allows you to save
trace
1, 2, or 3 along with state. Saving trace All saves
all traces in a single .trc file, along with the state.
To Next Page
Loading...
Need help?
General
