Getting Started Turning the Power Meter On
18 EPM-P Installation Guide
What Can Go
Wrong?
See this Do this
Orange LED not lit Check that power is supplied to the meter.
Check the power meter fuse. (see Step 5)
Fails self test(s) If there are any self-test failures the meter is
defective. Contact your nearest Agilent
Service Center (Refer to
Agilent Sales and
Service Offices on page 44).
5. Line input fuse and spare.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com