Agilent InfinityLab LC Series Multicolumn Thermostats User Manual 27
1 Introduction to the Multicolumn Thermostat
Leak and Waste Handling
Waste Concept
1 Agilent recommends using the 6 L waste can with 1 Stay Safe cap GL45 with
4 ports (5043-1221) for optimal and safe waste disposal. If you decide to use
your own waste solution, make sure that the tubes don't immerse in the liquid.
Leak Sensor
CAUTI ON
Solvent incompatibility
The solvent DMF (dimethylformamide) leads to corrosion of the leak sensor.
The material of the leak sensor, PVDF (polyvinylidene fluoride), is incompatible
with DMF.
Do not use DMF as mobile phase.
Check the leak sensor regularly for corrosion.
To Next Page
Loading...
Need help?
General
