Agilent Technologies G7116A User Manual

Agilent InfinityLab LC Series Multicolumn Thermostats User Manual 62
3 Using the Module
Installing the capillaries
7 Fasten all fittings on attached modules (autosampler, detector, additional
pumps). Fit all unused valve ports with blank nuts.
8 Push the valve into the rear position.
9 Place the capillaries that go to another module or waste into the capillary
guides to prevent squeezing them when closing the front cover.
10 Stow any excess lengths of the capillaries.
11 Perform a final leak check.

Agilent Technologies G7116A Specifications

General

Brand	Agilent Technologies
Model	G7116A
Category	Laboratory Equipment
Language	English