Agilent Technologies
Agilent InfinityLab LC Series
1260 Infinity II Fraction Collectors
Inlet / Waste Tubings Replacement
This technical note describes the installation of the inlet/waste tubing kit to a
1260 Infinity II Fraction Collector:
• Agilent InfinityLab LC Series 1260 Infinity II Preparative-Scale Fraction
Collector (G1364E)
• Agilent InfinityLab LC Series 1260 Infinity II Analytical-Scale Fraction
Collector (G1364F)
• Agilent InfinityLab LC Series 1260 Infinity II Bio-inert Fraction Collector
(G5664B)
Contents
Replace the Inlet/Waste Tubings 2
Replace the Valve to Needle Tubing 8
To Next Page
