Need help?Do you have a question about the Agilent Technologies Triple Quadrupole LC/MS and is the answer not in the manual?
General| Brand | Agilent Technologies |
|---|---|
| Model | Triple Quadrupole LC/MS |
| Category | Laboratory Equipment |
| Language | English |
Provides information on CAUTION and WARNING notices for safe operation and potential hazards.
Information on data analysis and library management documentation, accessible via code or URL.
Details compliance with EU and UK regulations like EMC, LVD, MD, and RoHS directives.
Overview of the Ultivo LC/MS system, including front and rear views and calibrant delivery.
Overview of the 6475A LC/MS system, covering front and side views and calibrant delivery.
Overview of the 6495D LC/MS system, detailing front and side views and calibrant delivery.
Explanation of the Electrospray Ionization (ESI) source and its operation.
Details on the Agilent Jet Stream (AJS ESI) source, its technology, and benefits.
Description of the Atmospheric Pressure Chemical Ionization (APCI) source.
Explains the purpose of tuning the MS to optimize sensitivity, resolution, and mass assignments.
Describes the procedures for autotune and checktune to verify instrument performance.
Procedure for performing a checktune on the LC/TQ instrument.
Provides a roadmap for setting up and running a batch of samples.
Instructions for starting the instrument in standby mode and shutting it down.
Steps to start the MassHunter Data Acquisition program.
Displays the status of each device configured with the instrument (e.g., Error, Idle, Running).
Window for entering acquisition parameters for the method.
Importance of instrument servicing and maintenance for optimal performance and accuracy.
Procedures for daily and weekly routine maintenance tasks.
Procedures for periodic maintenance tasks, including pump oil checks and replacements.
Procedures for general maintenance like installing/removing nebulizers and capillaries.
To Next Page