Agilent Technologies Triple Quadrupole LC/MS - Scheduling an Autotune

3Tuning
Scheduling an Autotune
Agilent Triple Quadrupole LC/MS System User Guide 54
Scheduling an Autotune
To specify to run an autotune automatically:
1 In the Instrument Status window, right-click the TQ device.
2 Click Schedule Tune.
The Schedule Tune dialog box opens.
NOTE
For the 6495D, access to Schedule Tune is also available within Method Editor >
Tune > Autotune or Checktune and clicking Schedule Tune.
3 Select Autotune in the left pane. The right pane shows the information for
scheduling an autotune.