Agilent Technologies Triple Quadrupole LC/MS - Advanced Tune - 6495 D; Advanced Tune (6495 D Only)

3Tuning
Advanced Tune (6495D only)
Agilent Triple Quadrupole LC/MS System User Guide 56
Advanced Tune (6495D only)
In the Advanced Tune section, launch the advanced tune view to perform a
manual tune.
NOTE
This application can only be accessed with specified user permissions. Access to
the Manual Tune privilege must be enabled in OLCP to access BOTH Configure
Tune and Advanced Tune. See the OpenLab Control Panel Help for more
information on setting permissions.
1 In the Method Editor window, click the TQ tab.
2 Click Tune > Advanced tune in the left pane.
3 Click Tune control in the toolbar to lock control of the instrument.
4 Click Launch advanced tune view to open the Manual Tune View window.
The Advanced Tune program opens separate from MassHunter.