Agilent Technologies N1914a Installation Guide

1Getting Started
30 N1913/1914A Installation Guide
To change the GPIB address manually proceed as follows:
1 Press ,
Remote Interfaces.
Figure 1-5 Typica l GP I B R e mote Interface
2 Use the arrow keys to highlight GPIB Address entry field.
3 Press and use the numeric keys to enter the GPIB address in the
Pop- up.
4 Press the Enter key
To change the address remotely.
You can set/query the GPIB address remotely using the following com-
mand
SYSTem:COMMunicate:GPIB:ADDRess.

Agilent Technologies N1914a Specifications

General

Brand	Agilent Technologies
Model	N1914a
Category	Measuring Instruments
Language	English