1Getting Started
16 N1913/1914A Installation Guide
Connecting a Power Sensor
E-Series, 8480, N8480 Series, and U2000 Series Power Sensor Models
Using the Agilent 11730A power sensor cable, any Agilent 8480, or N8480
Series, E- Series power sensor can be connected to the N1913A or N1914A
power meters. The U2000 Series power sensors can be connected to the
meter using the Agilent U2031A power sensor cable.
The following shows the procedure for single channel meters configured
with front panel mounted POWER REF and CHANNEL connectors. The
procedure is similar for meters configured with rear panel connectors.
Also, for dual channel meters (N1914A), you should repeat the procedure
for the channel B sensor.
1 Connect the sensor to a 11730A cable.
To Next Page
Loading...
Need help?
General
