Agilent Technologies N9038A - Page 16

16
Instrument Memory & Volatility
Non-Volatile Memory
9. Config
Memory
(EEPROM)
8 kbit
No Yes Header EEPROM
used to identify the
assembly.
Programmed
before
installation.
A11 RF
Switch / High
Band Preamp.
Contains no
user data.
None.
10. Config
Memory
(EEPROM)
8 kbit
No Yes Header EEPROM
used to identify the
assembly.
Programmed
before
installation.
A12 YTF
Assembly.
Contains no
user data.
None.
11. Config
Memory
(EEPROM)
8 kbit
No Yes Header EEPROM
used to identify the
assembly.
Programmed
before
installation.
A13 Front End
Assembly.
Contains no
user data.
None.
12. Config &
Cal Memory
(EEPROM)
8 kbit
No Yes Header EEPROM
used to identify the
assembly.
Programmed
before
installation.
A14
Synthesizer
Assy.
Contains no
user data.
None.
13. Config
Memory
(Flash)
8 Mbit
(1024 x 8)
No Yes Contains
measurement and
control software,
which is preloaded
into FPGA during
instrument power-up.
Programmed
before
installation.
A14
Synthesizer
Assy.
Contains no
user data.
None.
14. Config &
Cal Memory
(EEPROM)
8 kbit
No Yes Header EEPROM
used to identify the
assembly.
Programmed
before
installation.
A15 Front End
Control Assy.
Contains no
user data.
None.
Table 5-1 Summary of Non-Volatile instrument memory
Memory
Component,
Typ e and Size
Writable During Normal Operation? Data Retained When Powered Off?
Purpose/Contents Data Input
Method
Location in
Instrument
and Remarks
Sanitization
Procedure