Agilent Technologies XGS-600 - Page 13

XGS-600 Gauge Controller
DRAFT 4/15/14
13
NOTE The Relay board provides additional compatibility when
replacing a Multigauge or senTorr controller. However, the
relays have a maximum rating of  30 VDC at < 2 A. See
Table A-1 on page 51 for additional specifications.
7
Ground Connection See “Connect the Unit” on page 15.
8
Setpoint Relay Connector See “Connect the Unit” on page 15.
Table 1-1 Front/Rear Panel Components (Continued)
Item Description Page