To Next PageTo Next Page
Need help?Do you have a question about the Agilent Technologies TwisTorr 74 FS AG and is the answer not in the manual?
General| Brand | Agilent Technologies |
|---|---|
| Model | TwisTorr 74 FS AG |
| Category | Controller |
| Pump Type | Turbomolecular Pump |
| Motor Speed | 90, 000 rpm |
| Cooling | Air |
| Ultimate Pressure | < 1 x 10-10 mbar |
| Inlet Flange | DN 63 ISO-K |
Provides general product information and manual conventions.
Specifies environmental conditions for transportation and storage.
Guidelines for handling and disposing of protective packaging.
Covers installation requirements and safety warnings.
How to power on the controller and interpret status LEDs.
Procedure for normal shutdown of the controller.
Instructions for immediate shutdown in emergencies.
Information on maintenance, service, and repair options.
Guidelines for environmentally sound disposal of the product.
Overview of controller versions, features, and architecture.
Detailed technical data including electrical, environmental, and operating parameters.
Physical dimensions and diagrams of the controller models.
Identifies connectors and indicators on the controller's rear panel.
Procedures for installing the controller on the pump.
Diagrams of input power connectors for different models.
Details on connecting fans, vent valves, pumps, and gauges.
Specifics on connecting pressure gauges via the J5 connector.
Details the J1 connector pinout and signal descriptions for remote control.
Information on the serial connector for RS-232/RS-485 communication.
Details communication protocols and address handling.
Practical wiring examples for RS-232 and RS-485 connections.
Describes serial communication using the "Windows" protocol.
Specifies communication format parameters.
Explains the MASTER/SLAVE communication protocol.
Lists and describes the meanings of various configuration windows.
Explains the effect of magnetic fields on pump performance.
Lists part numbers for accessories and spare components.
