Instructions for Use
Use
16
TwisTorr 74 FS AG On-board Controller User Manual / 87-901-054-01 137/192
CAUTION!
The TwisTorr 74 FS AG On-board belongs to the second installation (or
overvoltage) category of the EN 61010-1 standard. Therefore, connect the device
to a mains line that complies with the above category.
The TwisTorr 74 FS AG On-board has Input/Output and serial communication
connectors that must be connected to external circuits in such a way that no live
parts of electronic board are accessible. Make sure that the insulation of the
device connected to the TwisTorr 74 FS AG On-board is adequate even in the
case of a single fault as per the EN 61010-1 standard.
For installation of optional accessories, see "Technical Information".
Use
This paragraph details the main operating procedures. Prior to
operating the Turbo controller, make all vacuum manifold and
electrical connections, referring to the turbo pump instruction
manual.
To Next Page
Loading...
Need help?
General
