Agilent Technologies XGS-600 - XGS-600 Front and Back Description

XGS-600 Gauge Controller
12
DRAFT 4/
15/14
XGS-600 Front and Back Description
The display is biased so as to be best viewed from directly in front or slightly above.
Figure 1-1 XGS-600 Front Panel
Figure 1-2 Backplate Connections (CNV, IMG, Analog and HFIG boards shown)
Table 1-1 Front/Rear Panel Components
Item Description Page
1
Display See “Screen Flow” on page 23.
2
Keypad/Navigation Keys See“General Navigation and Data Entry” on page 24.
3
Open-Collector Set Point
Outputs
See “Set-Point Connector Pin Assignments” on page 61.
4
Serial Communication Connector
“Serial Connector Pin Assignments” on page 61.
5
Gauge Board Slots (6) See “Board Specifications/Descriptions” on page 55.
6
On/Off Power Switch and
AC Power Plug Receptacle
See “Connect the Unit” on page 15.
1 2
3
4
6
5
7
8