Agilent Technologies XGS-600 - Appendix A. XGS-600 Gauge Specifications; Instrument Specifications

XGS-600 Gauge Controller
DRAFT 4/15/14
51
Appendix A. XGS-600 Gauge Specifications
Instrument Specifications
Table A-1 provides the XGS-600 instrument specifications.
Table A-1 General XGS-600 Gauge Specifications
Specification Description
Display Type: Backlit dot matrix monochrome LCD
Backlight: White LED
Small Font mode: Up to 8 channels displayed simultaneously
Large Font mode:Up to 2 channels displayed, readable from 15 feet
Keypad 5 button membrane with positive tactile feedback
Serial Communication ASCII protocol: RS232 and RS485, no parity
BCD protocol: RS232
RS485 address range: 00 - FF
Baud Rate: 9600 or 19600
Open-Collector
Set-Point Outputs
Type: 8 open collector type, ground referenced outputs
Voltage Rating: 32 VDC max
Current Rating: 50 mA max
Output Voltage:
V
out
To Gnd
V
on
@ 5 mA = 0.6 V
max
V
on
@ 25 mA = 0.75 V
max
V
on
@ 50 mA = 0.90 V
Programming capability:
Can assign up to 2 outputs per gauge channel
Separate make and break pressure levels
Independent time delays on make and break of 0.0 to 9.9 seconds
Manual override capability of each set point output
Response Time: 20 msec max (when delay = 0.0)