XGS-600 Gauge Controller
52
DRAFT 4/
15/14
Relay Set-Point Outputs Electromagnetic relay Form C
Voltage Rating: 30 VDC max
Current Rating: 2 A DC max
Contact Resistance:
❑ 50 mOhms - contacts are nickel, silver, gold plated
Programming capability:
❑ Can assign up to 2 outputs per gauge channel
❑ Separate make and break pressure levels
❑ Independent time delays on make and break of 0.0 to 9.9 seconds
❑ Manual override capability of each set point output
Response Time:
❑ Make: 30 msec max
❑ Break 40 msecs max
Chassis Dimensions: ½ rack, 2U high, 11" deep
Material: Grey Polycarbonate
Ventilation:Internal fan with plenum and over-temperature sensing
Fuse Rating 250V, 5A, FAST-BLO, 5x20mm
Mains Power and Cordage Voltage: 100-120, 200-240 VAC ±10% 50/60 HZ, 2A
Available worldwide IEC cords
Environmental/Installation Storage Temperature: -15 to 70° C
Operating Temperature: BV certified 5 to 40° C, at 5 to 95% RH,
non-condensing
Installation Category: 2
Pollution Degree: 2
Indoor use
Altitude: Up to 2000 m
Table A-1 General XGS-600 Gauge Specifications (Continued)
Specification Description
To Next Page
Loading...
