XGS-600 Gauge Controller
DRAFT 4/15/14
53
Figure A-1 Open Collector Setpoint Equivalent Circuit
When the setpoint is:
❑ Off, no current flows into the transistor and the output voltage equals V
supp
.
❑ On, current flows into the transistor and the output voltage will be near ground. See
Table A-1 for a specification of this voltage as a function of current.
Regulatory Approval CE Certified:
Safety:
EN61010
Emissions:
EN6100-3-2 : 2006
EN6100-3-2 : 2005
EN61326: 1997/A1: 1998/A2: 2001/A3: 2003
EN55011
FCC Part 15 subpart J
Certified to CSA1010 for US and Canada
RoHS Compliant
WEEE labeled
Table A-1 General XGS-600 Gauge Specifications (Continued)
Specification Description
To Next Page
Loading...
