Agilent Technologies XGS-600 - General Navigation and Data Entry

XGS-600 Gauge Controller
24
DRAFT 4/
15/14
General Navigation and Data Entry
Examples:
Turning a gauge on:
a. Cursor over to the control field for a gauge.
b. Press + or - keys to view control options (ON, OFF, etc).
c. Press OK.
Modifying a number:
a. Cursor over to the number.
b. Press + or - keys to increment/decrement number.
c. Press OK.
Navigating to another screen:
a. Cursor over to the screen navigation soft key (usually lower right corner of
screen).
b. Press OK.
NOTE Escape keys: While scrolling through options or data using the
+/- keys, you can escape without accepting new data by
pressing any cursor navigation key. The original data is kept
and displayed.
Use navigation keys to locate cursor on an area of interest (ex. data entry,
gauge control or screen navigation soft key). Only fields that are user-variable
are accessible by the cursor. Hold the key pressed for faster cursor movement.
Press the + or - keys to increment/decrement the field value through all
options. Hold the key pressed for fast increments/decrements.
Use the OK key to accept the selected option or data.
+
-
OK