Maintenance
The mattress requires regular maintenance to ensure performance and
avoid premature wear, damage and injury.
Check the items on this chart at the indicated intervals. If any of the items are loose, worn, bent or
distorted immediately have them checked and/or repaired by an authorized Agiliti technician. Frequent
maintenance and servicing will improve performance and extend product life.
Open Cell Foam Filter X
HEPA Filter X
Top Cover X
Mattress Base X
Mattress Connections X
Control Unit Operation X
Power Cord X
The following is an equipment safety checklist that can be used with the maintenance chart to maintain
and service this product:
__Inspect top cover for punctures, rips, tears or damage.
__Inspect mattress base for punctures, rips, tears or damage.
__Connect the control unit and verify proper operation (if installed).
__Ensure air filter is clean and properly installed into control unit (if installed).
__Ensure mattress is clean/disinfected and patient ready.
All power cords are fastened in a manner to keep them free from moving or pinching parts. At any time
parts are replaced, all cords should be secured into proper position to prevent damage.
IFU0000073 Immerse User Manual
To Next Page
Loading...