Other functions
When you have programmed the multi-remote
control using the above instructions you will
be able to operate your unit, f.ex. CD, DVD or
VCR player with it. Basically, the menu function
buttons on the multi-remote control cor
-
respond to the buttons on the remote control
which was originally supplied with your device
(f.ex. CD, DVD player), and it is, therefore, a
good idea to keep the instructions for your old
remote control so that you can find informa
-
tion on its operating functions. Here is a short
review of some of the operating functions
which are on the multi-remote control.
Start:
To operate the unit, first press the button for
the required unit f.ex.CD, DVD or VCR on the
remote control.
On/Off:
You turn the unit on and off using the ”On/
Off” button.
Play:
If the unit is to play a media, press the ”Play”
button. To stop playing, press the ”Stop” but
-
ton. You can also make a pause in the number
using the ”Pause” button. You can wind
forwards and backwards in the number by hol
-
ding the ”Fast forward” and ”Fast backward”
button down respectively. With a short press
on the same button you can jump forwards/
backwards to the next/previous number on
f.ex. the CD.
Selecting a number when playing CD:
If you wish to play a certain number you can
select it using the number buttons (1-9, use
the “0/10” button to select numbers over 9,
press f.ex. the “0/10” button twice and then 4
to select number 24).
13
To Next Page
Loading...