5.1
1. * For some versions, does not support 2 SIM cards AGM Glory_G1S
data services working together. When inserting 2 SIM cards, you can
only choose one of the 2 SIM cards to use 5G services.
SIM Tips：
B28AB,B66
The supports dual SIM dual standby but single pass. AGM Glory_G1S
This means that you cannot use both SIM cards for calls or data
services simultaneously.
LTE-FDD: B1,B2,B3,B4,B5,B7,B8,B12,B13,B17,B18,B19,B20,B25,B26,
5G: n1,n2,n3,n5,n7,n8,n28,n41,n77,n78,n66
WCDMA: B1,B2,B4,B5,B6,B8,B19
2. Nano-SIM and Micro SD card socket can only be used for either
Nano-SIM or Micro SD card. Place the Nano-SIM vertically or place
Micro SD card horizontally.
GSM: 850,900,1800,1900
Network frequency band(*Variant dependent)
3. Make sure the cards are correctly aligned and the tray is level before
inserting it into the phone.
4. SIM card adapter. A cut SIM card or any other non-standard cards
are not allowed. Those non-standard cards may not be recognized by
the phone and can damage the tray.
LTE-TDD: B34 B38 B39 B40 B41
CMDA: BC0,BC1,BC10
Micro SD Tips:
1. Do not remove the Micro SD card while using the phone, as the card
may be damaged. AGM will not be held responsible for any
subsequent data loss or card damage resulting from this action.
2. Power off the phone before installing or removing the Micro SD
card.
3. Please note that AGM does not provide Micro SD cards.
To Next Page
Loading...
