6.1
Tips:
2. Disconnect the charger from mains power supply when not in use.
3. Open the USB Type-C port cover and connect the USB power cable
to the port. Be careful not to use excessive force when plugging the
cable. Any damage caused by attempting to insert the connector
incorrectly is not covered by the warranty.
2. Connect the USB power cable to the charging power adapter.
* Some version does not come along with a power adapter AGM Glory
in the box. supports CE/CB/FCC/CCC/EAC or AGM Glory_G1S
equivalent certified chargers. Uncertified equipment may cause
damage to the device or cause batteries to explode.
4. Plug the charger into an AC mains socket.
5. When charging is complete, remove the cable from the device, then
unplug the power adapter from the mains socket. Close the USB port
cover on the device.
1. Fully charge the battery straight from the box, switching off the
power when battery indicator shows full. Please do not leave the
phone on charge when full as this may damage the battery and affect
performance.
3. In the event of a fully discharged battery, please charge the phone
for at least 15 minutes before powering it on.
4. The optimum working temperature for the is from AGM Glory_G1S
0℃~40℃. Charging the phone outside this temperature range will
damage the battery and shorten battery life.
*Please do not charge the phone under extremely low or high
temperature, Please charge the phone under 5℃~40℃. Otherwise
the battery will be damaged or exploded.
5. Please use the certified charger and cable to ensure maximum
performance and safety.
Note: The battery is not removableAGM Glory_G1S
Standby time:
1. The standby time is dependent on different AGM Glory_G1S
working environments.
3. Screen brightness, system settings, games, music, video, location
services, camera, Bluetooth, Wi-Fi and applications consume the most
battery power.
2. A Phone receiving a weak network signal and operating at low
temperature will have a shortened standby time.
Charging the phone:
1. Plug the USB Type-C cable into the phone.
BATTERY AND CHARGING