EN TR
Operator's Manual
BM
Kullanım Kılavuzu
5.2. SAFETY NOTICES
• Read the operation and maintenance manual carefully
before rst start up and keep this manual easy reachable place.
• Obey all rules, work site and local regulations which affect
you and your machine.
• You can be injured if you don't wear the proper clothing.
Loose clothing can get caught in the equipment. Wear
protective clothing to suit the job. Examples of protective
clothing are: a hard hat, safety shoes, safety glasses, a well-
tting overall, ear-protectors and industrial gloves. Keep cuffs
fastened. Don't wear a necktie or scarf. Keep long hair
restrained.
• Before start up the machine, control the all connection
points, bolts and nuts. If necessary tighten them. If there is any
worn part replace to new one.
• Make sure that, equipment attached and adjusted
completely.
• Don't transport people or animals on the equipment.
• Always use original parts
• Don't stand on the operation area of machine while it is
working.
• If your machine driven by shaft:
a) Change the shaft plastic protector if it is worn
b) Grease the shaft after working
c) Don't go over the limit tractor PTO rotation which is
mentioned in this manual.
d) Detach the shaft while transporting of machine
• Only start working with equipment if all protective devices
are in perfect positions, installed and in safe position.
• Before working, make sure that, there is not any person or
animal around.
• Don't leave from the driver's seat while tractor is working.
• Carefully read all the instructions before using machine; in
doubt contact technicians of Manufacturer's dealers.
Manufacturer declines all responsibility for non-observance of
the safety and accident prevention regulations described
below.
5.2. GÜVENLİK UYARILARI
• Makney kullanmadan önce kılavuzu dkkatlce okuyunuz.
Şüpheye düşersenz malâtçı firmanın satıcısının
teknsyenlerne ulaşınız.
• Aşağıda tanımlanan güvenlk kuralları ve kaza koruması
talmatlarına uyulmadığı taktrde oluşacak sonuçlardan
malâtçı firma sorumlu değldr.
• İşe başlamadan önce kullanım ve bakım ktapçığını yce
okuyun ve çalışırken ktapçığı kolay ulaşableceğnz br yerde
tutunuz.
• Kendnzn güvenlğ ve maknenzn uzun ömürlü olması
çn ktapçıkta belrtlen tüm kurallara uyunuz.
Uygun olmayan elbseler hareketl parçalara takılablr.
Çalışırken uygun elbseler gynz. Örneğn kask, güvenl
ayakkabı, güvenlk gözlükler, üzernze bol olmayan elbseler,
kulak koruyucuları ve ş eldvenler.
• Çalışmaya başlamadan önce makne veya ekpmanın
bağlantılarını kontrol edp tüm cıvata ve somunların yeternce
sıkılmış olduğundan emn olunuz. Aşınan parça varsa
değştrnz.
• Ekpmanın doğru şeklde takıldığını ve ayarlandığını
kontrol ednz.
• Parçalar kullanılamaz hale geldğ zaman mutlaka orjnal
parçalarla değştrnz.
• Hç br koşulda nsan, hayvan ve eşya makne üzernde
taşınamaz.
• Ma k nenn ha reke t a l a nı çer snde kesnl k le
bulunmayınız.
• Kullandığınız makne şaft le çalışıyor se:
a) Şaftın plastk muhafaza kılıarının parçalanması halnde
mutlaka yenleynz.
b) Şaftı kullanımdan sonra mutlaka y br gres yağıyla
yağlayınız.
c) Kullanım kılavuzunda belrtlen traktör kuyruk ml
devrn hçbr zaman geçmeynz.
d) Taşıma sırasında şaftı çıkarınız.
• Tüm aksamların tam olarak çalıştığından ve her şeyn
yolunda olduğundan emn olduğunuzda çalışmaya başlayınız.
• Ekpmanı çalıştırmadan önce etrafta nsan veya hayvan
bulunmadığından emn olunuz.
• Traktör motoru çalışırken asla sürücü koltuğundan
ayrılmayınız.
10
5.3. MAKİNE ÜZERİNDE BULUNAN UYARI ETİKETLERİ
Aşağıda belrtlen şaretler maknenn üzernde yer
almaktadır (Şek. 4). Etketler temz tutunuz ve okunmaz veya
kullanılmaz se yenleynz.
Her br tanımı dkkatlce okuyunuz ve yce öğrennz.
1. Çalıştırmadan önce kullanım kılavuzunu dkkatlce
okuyunuz.
2. Bakıma almadan önce makney durdurunuz ve kullanım
kılavuzuna başvurunuz.
3. Makne çalışır durumda ken tehlkel olablr. Makne le
aranızdak güvenl mesafey koruyunuz.
4. Ezlme Tehlkes. Hareketl parçalardan uzak durunuz.
5. Makney yağlamadan çalıştırmayınız.
6. Maden etket.
a- Üretm Yılı
b- Ser Numarası
c- Ağırlığı
d- Model
Прочтите руководство
по эксплуатации
Stop engne before
servcng
Остоновите двигатель
перед обслуживанием
Keep all shelds
n place
when operatng
Держите все щиты в
месте при работе
11
Fg. 4
Şek. 4
EN TR
Operator's Manual
BM
Kullanım Kılavuzu
5.3. SAFETY STICKERS ON THE MACHINE
The signs described are reproduced on the machine (Fig.4).
Keep them clean and replace them if they should come off
or become illegible. Carefully read each description and learn
their meanings by heart.
1. Before operating, carefully read instruction booklet.
2. Before carrying out maintenance, stop machine and
consult instruction booklet.
3. Danger getting squashed during opening. Keep at a safe
distance from machine.
4. Danger getting trapped. Keep away from moving parts.
5. Do not operate without lubrication.
6. Identication plate.
a- Production Year
b- Serial No
c- Weight
d- Model