en | AHT Cooling Systems GmbH Residual risks | 2.5.4
409654_1_0120
29 / 458
▪ The bracket for the display shelves and the
display shelves must fully engage in the
slots provided during suspension.
Leakage of defrost water. Leakage of
liquids from damaged packaging.
Slipping hazard
▪ Check for puddles in front of and under the
appliance.
▪ Promptly remove leaking defrost water/li-
quids.
Safety when handling glass
CAUTION
Glass breakage.
Cut wounds to the body. Shock injury.
▪ Do not install appliances with laminated in-
sulating glass at altitudes above 2000 m
(6562 ft). Laminated insulating glass may
break due to air pressure difference.
▪ Check glass elements for damage, e.g.
cracks, breaks. In the event of damage,
promptly contact the maintenance service
(see →Maintenance services).
▪ Check for breakage of stored glass con-
tainers.
▪ Do not climb onto or into the unit.
Dispose of broken glass.
Hand cuts.
▪ Use protective gloves to remove split glass
parts and goods that may have been dam-
aged as a result.
▪ Carefully and completely remove all split
glass parts and damaged goods.
2.5.4 Residual risks
The manufacturer accepts no liability for damage
caused by non-compliance with this manual and other
manufacturer specifications.
To Next Page
Loading...
Need help?
General
