EasyManua.ls Logo

AIDA CCU-IP - Camera Control Parameters

AIDA CCU-IP
24 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
10
SECTION: 3
WHITE BALANCE
EXPOSURE
BRIGHTNESS
White Balance Mode Toggle through the applicable white balance modes the camera
has to offer.
White balance AutoInstantly switch to Auto white balance mode.
Exposure ModeToggle through the applicable exposure modes the camera has to offer.
Exposure AutoInstantly switch to Auto exposure mode.
Brightness upinstantly increase the brightness of the picture by an interval.
Brightness downinstantly decrease the brightness of the picture by an interval.
1: RGAIN/BGAIN +/- - Instantly change to manual white balance mode and change
either the red or blue gain. By clicking the knob, you will select the next selection
(default Rgain)
2: PT SPEED – Controls the pan tilt speed of the camera by intervals.
3. IRIS– instantly switch to manual auto exposure mode and adjust the opening and
closing of the iris.
4. ZOOM SPEED – changes the speed at which the camera zooms by intervals.
5. CAMERA SELECTION – used to select each camera set by the user. The button that
is lit up is the currently selected camera.