AIDA HD-100A - SETUP; Camera Title; Communication Settings; Output Format

15
Camera setup can be adjusted from this menu.
CAM TITLE : OFF, ON
Camera title can be turned ON or OFF.
COMMUNICATION : ON, OFF, AUTO ( VISCA communication control can be adjusted )
• CAM ID : 0 ~ 7 ( Camera ID can be setup )
• ID DISPLAY : OFF, ON ( Camera ID can be setup )
• BAUDRATE : 2400, 4800, 9600, 19200, 38400 ( Camera baudrate can be set )
SYSTEM INFO : ON, OFF, AUTO ( Camera information can be found under this menu )
OUTPUT FORMAT : ON, OFF, AUTO ( Camera resolution and frame rate can be set )
SETUP
MODE : FACTORY, USER
Camera will reset to factory default or user saved value.
RESET :
Reset the camera to the selected mode.
SAVE AS USER :
Save the user desired setting from the menu. Mode must be set to User.
Supported formats are:
* 1080p by default
1080P - 60 / 59.94/50 / 30
29.97 / 25 / 24
1080I - 60 / 59.94 / 50
720P - 60 / 59.94 / 50
RESET
SETUP
*CAM TITLE OFF
COMMNUCATION
SYSTEM INFO
OUTPUT FORMAT 1080P30
RETURN
RESET
*MODE FACTORY
RESET
SYSTEM INFO
SAVE AS USER
RETURN