aigo A396+
| 12 |
► Right Joystick button:
1）Move cursor RIGHT in menu mode.
2）Move into next folder level (in File List mode).
3）To copy / delete file.
3）Scroll to previous file during photo playback.
4）Move photo to right when zoom in (works ONLY when control bar is
closed).
5）Scroll to previous photo at the end of 9-photos thumbnail mode.
“ENTER” button:
1）To confirm or open a selected item.
“ESC” button:
1）To Exit.
Power ON/OFF switch
1) To turn ON/OFF the power supply.
- When it is turned to OFF position, the frame will be turned OFF;
- When it is turned to ON position, the frame will be turned ON;
- When it is pushed further upwards to LED, the decorative LED
indicators (optional) along the side of the frame will be turned ON.
aigo A396+
| 13 |
Remote control keys (optional)
aigo A396+
| 14 |
DIRECTIONAL buttons : To select on-screen
items.
ENTER button: To confirm a selection / Enter /
OK.
INFO button: To view the file information.
ROTATION button: To rotate a picture in
anti-clockwise or clockwise direction.
ESC button: To exit a menu or folder.
MUTE key: To silence audio during slideshow
playback.
Zoom key: To zoom during slideshow playback.
Volume key: Use for volume control.
MODE key: Use to toggle slideshow display in
normal or wide screen mode.
Note: Effective distance for remote control is within 5m, horizon angle±45
and vertical angle±5.
aigo A396+
| 15 |
Changing the Clip-On Panel (Interchangeable)
The A396+ is bundled with two sets of interchangeable Clip-On Panel,
one Multicolor and one Silver unit.
1. Pick up the frame from the table.
2. Press the Clip-On Panel Lock on the top of the A396+ and carefully
dismantle the frame from the Outer Frame.
3. Place the main unit (frame) on the table.
4. To separate the Clip-on Panel from the Outer Frame, press the back
of the Clip-on Panel firmly and separate it from the Outer Frame.
- Now get the other Clip-On Panel and replace it.
To Next Page
Loading...