32
Use the
Bit Rate soft-key to set the rate at which the PRBS generator is clocked. The value
may be changed in either of the ways detailed in General: Numeric Editing.
Use the
Ampl and Offset soft-keys to set these parameters as for any other carrier wave. The
Edge soft-key will allow the rise and fall time to be set. Note that the edges are always coupled and
will be adjusted together.
Modulation
PRBS may be modulated or used as a modulation shape in the same way as sine or ramp, etc.
See the Modulation section for more information.
To Next Page
Loading...
