Data Recall
To review data stored in Solo memory, push MEM button. The Data Recall page appears; it is
as shown below on the left for “Speed” and “Regularity” mode and can include more pages; for
performance mode however, all data is shown in a page as below:
CHAPTER 9
DATA RECALL
Data in Memory Deletion
You can delete Solo memory in two different ways:
• Follow this path: MENU >> Stored Data >> Clear Test Data and press OK.
• After data download with Race Studio 2 software the system will ask you if you are
going to delete or not delete the logger memory.
30 31
To Next Page
Loading...
