AimCam PRO 2 - Hardware Maintenance; Changing the AimCam Lenses

Insert the hooked edge
(Left of this image) into
the side channel.
Once the hook is
rmly in place, push
the opposite side into
position.
Firmly manipulate
curved catch into
channel (Expect some
resistance the rst time
you do this).
Ensure you release the
opposite side rst when
taking out the lense
(Right of this image).
Remove the hook from
the channel (Left of this
image).
Slide lense to release.
11.
Changing your AimCam lenses
1.
2.
3.
4.
5.
6.
13