AimCam PRO 2 - Your Aimcams Markings

BEFORE YOU GET STARTED!
Your AimCam meets the following protective eyeware
standards:-
USA
ANSI/ISEA Z87.1-2015 (impact resistant)
MARKINGS
A series of numbers are marked on the ocular and
frame, which refers to the eld of use, the protection
capabilities and performance.
FRAME- AC Z87+
1. AC- Identication of the manufacturer
2. Z87+ - ANSI standard for Eye and Face
Protection Devices:
• High Mass Impact Test
• High Velocity Impact Test
• Plastic Lens Penetration Test
OCULAR- AC Z87+ U6
1. AC- Identication of the manufacturer
2. Z87+ - ANSI standard for Eye and Face
Protection Devices:
• High Mass Impact Test
• High Velocity Impact Test
• Plastic Lens Penetration Test
3. U6- UV lter transmittance
UV Filter Transmittance:
U2: Max Eective Far UV= .1% / Max Near UV= 3.7%
U2.5: Max Eective Far UV= .1% / Max Near UV= 2.3%
U3: Max Eective Far UV= .07% / Max Near UV= 1.4%
U4: Max Eective Far UV= .04% / Max Near UV= .5%
U5: Max Eective Far UV= .02% / Max Near UV= .2%
U6: Max Eective Far UV= .01% / Max Near UV= .1%
More information on your AimCams markings can be
found at https://aimcam.com
2